Loading...
: This is a fast-drying system. For gold and copper tones (GD/CU series), use thinner coats (50–70 g/m²) to maintain brilliance. Maintenance of the Finished Piece
: Do not use harsh household cleaners or abrasive substances, as they will damage the metallic finish.
This metallic lacquer is designed for interior fittings, furniture, and decorative glass. For best results, follow these application guidelines:
: Use a soft duster for dry cleaning or a slightly dampened microfibre cloth for deeper cleaning.
: Do not apply too wet, as this can ruin the uniform metallic effect.
Add (DV 4900 for small areas, DV 4994 for large areas) depending on your desired effect.
: Use a cup gun with a small nozzle size between 1.2 mm and 1.5 mm . Mixing :
Combine with or DR 4071 in a 10:1 mixing ratio by volume.
: This is a fast-drying system. For gold and copper tones (GD/CU series), use thinner coats (50–70 g/m²) to maintain brilliance. Maintenance of the Finished Piece
: Do not use harsh household cleaners or abrasive substances, as they will damage the metallic finish.
This metallic lacquer is designed for interior fittings, furniture, and decorative glass. For best results, follow these application guidelines: : This is a fast-drying system
: Use a soft duster for dry cleaning or a slightly dampened microfibre cloth for deeper cleaning.
: Do not apply too wet, as this can ruin the uniform metallic effect. This metallic lacquer is designed for interior fittings,
Add (DV 4900 for small areas, DV 4994 for large areas) depending on your desired effect.
: Use a cup gun with a small nozzle size between 1.2 mm and 1.5 mm . Mixing : Add (DV 4900 for small areas, DV 4994
Combine with or DR 4071 in a 10:1 mixing ratio by volume.