Power for the internal relay of the turn signals; connect to +12V (fused).
To pair a new replacement remote , turn the ignition on, press the Valet button 3 times, then hold button 1 on the remote until the siren chirps.
Negative output for 2nd channel (e.g., trunk release). aps 1350 shema podkljuchenija
Always disconnect the vehicle's negative battery terminal before starting any electrical installation to prevent short circuits.
Main system power; connect to a constant +12V source. Power for the internal relay of the turn
Ignition sensing; connect to the terminal that receives +12V only when the ignition is on.
Green/White (NC), Blue/White (COM), Yellow/White (NO). Programming Tips turn the ignition on
Siren output; connect to the red wire of the siren. Secondary Connections (11-Pin Connector)