Sitemap

Daewoo Lanos Full Engine Service Manual May 2026

Overhaul procedures for both SOHC and DOHC variants.

The Lanos was typically equipped with three primary engine displacements, each requiring specific service parameters. Specification Horsepower ~75 HP @ 5400 rpm ~86 HP @ 5800 rpm ~105 HP @ 6000 rpm Torque 115 Nm @ 3400 rpm 130 Nm @ 3400 rpm 145 Nm @ 3400 rpm Compression Ratio Spark Plug Gap 0.70–0.80 mm 0.70–0.80 mm 1.00–1.17 mm 🔧 Key Maintenance & Torque Data Daewoo Lanos Full Engine Service Manual

Maintenance of the electronic injection system and PCV valve. 📊 Engine Specifications Overhaul procedures for both SOHC and DOHC variants

The manual serves as a complete reference for professional mechanics and DIY owners. It includes step-by-step disassembly, torque specifications, and system diagrams for the various inline-4 "E-TEC" engines found in the vehicle. Core Manual Sections 📊 Engine Specifications The manual serves as a

Specifications for radiator, thermostat, and oil pump service.

ECM wiring diagrams and pin-out voltage tables.

According to technical guides and user service reports , these are the critical service points:


  • DESCRIPTION

  • SPECIFICATIONS

  • FEATURES

  • VIDEO
  •  New
    WORKING PRINCIPAL
  •  New
    REVIEW

OVERVIEW

The Asphalt Content/Binder Furnace with internal automatic balance is an environmentally-friendly and cost-effective method for the accurate determination of asphalt content. Ignition method reduces testing time compared to solvent testing methods and automatic operation frees technicians for other tasks. Accurate internal balance monitors weights automatically throughout ignition. Easy operation- simply enter sample weight, calibration factor, load the sample, and push start, when unit beeps at test end, push stop, and sign receipt.

Model approved and certified by IIT Gandhinagar.

Exterior body

Fabricated from Mild Steel Material

Exterior Body Paint

Powder coating in attractive shades

Inner chamber

Constructed from stainless steel with matt buffing

Insulation

High Temperature cera wool insulation

Insulation thickness

75 mm (3 Inches)

Chamber Dimensions

350 x 350 x 350 mm

Chamber volume

42 Liters

Max weight of specimen

4500 gms

Commendatory weight of specimen

1000-1500 gms

Capacity of balance

10 kg

Precision of balance

0.1 gms

Max working temp of chamber

600 °C

Standard working temp

538 °C with temperature compensating technique

Temperature sensor

K-Type thermocouple

Temperature Control

7″ Touch screen HMI & PLC Controller

Testing Time

30-45 minutes

Ramp & Profile Programming

In built- ramp & profile programming in LCD Touch Screen

Display

LCD Colour display

Results on

In-Built Dot-Matrix Printer

Power Supply

AC 440V ± 10%, 50 Hz

Accessories

Supplied complete with Sample Bucket, Lifting Handle and Asbestos gloves

Overall Dimensions

800 X 800 X 1600 (L X W X D) mm

Weight (Approx.)

290 Kgs Approx.

SS


Related Searches

SPECIFICATIONS

The Asphalt Content/Binder Furnace with internal automatic balance is an environmentally-friendly and cost-effective method for the accurate determination of asphalt content. Ignition method reduces testing time compared to solvent testing methods and automatic operation frees technicians for other tasks. Accurate internal balance monitors weights automatically throughout ignition. Easy operation- simply enter sample weight, calibration factor, load the sample, and push start, when unit beeps at test end, push stop, and sign receipt.

Model approved and certified by IIT Gandhinagar.

Exterior body

Fabricated from Mild Steel Material

Exterior Body Paint

Powder coating in attractive shades

Inner chamber

Constructed from stainless steel with matt buffing

Insulation

High Temperature cera wool insulation

Insulation thickness

75 mm (3 Inches)

Chamber Dimensions

350 x 350 x 350 mm

Chamber volume

42 Liters

Max weight of specimen

4500 gms

Commendatory weight of specimen

1000-1500 gms

Capacity of balance

10 kg

Precision of balance

0.1 gms

Max working temp of chamber

600 °C

Standard working temp

538 °C with temperature compensating technique

Temperature sensor

K-Type thermocouple

Temperature Control

7″ Touch screen HMI & PLC Controller

Testing Time

30-45 minutes

Ramp & Profile Programming

In built- ramp & profile programming in LCD Touch Screen

Display

LCD Colour display

Results on

In-Built Dot-Matrix Printer

Power Supply

AC 440V ± 10%, 50 Hz

Accessories

Supplied complete with Sample Bucket, Lifting Handle and Asbestos gloves

Overall Dimensions

800 X 800 X 1600 (L X W X D) mm

Weight (Approx.)

290 Kgs Approx.

SS

FEATURES

The Asphalt Content/Binder Furnace with internal automatic balance is an environmentally-friendly and cost-effective method for the accurate determination of asphalt content. Ignition method reduces testing time compared to solvent testing methods and automatic operation frees technicians for other tasks. Accurate internal balance monitors weights automatically throughout ignition. Easy operation- simply enter sample weight, calibration factor, load the sample, and push start, when unit beeps at test end, push stop, and sign receipt.

Model approved and certified by IIT Gandhinagar.

Exterior body

Fabricated from Mild Steel Material

Exterior Body Paint

Powder coating in attractive shades

Inner chamber

Constructed from stainless steel with matt buffing

Insulation

High Temperature cera wool insulation

Insulation thickness

75 mm (3 Inches)

Chamber Dimensions

350 x 350 x 350 mm

Chamber volume

42 Liters

Max weight of specimen

4500 gms

Commendatory weight of specimen

1000-1500 gms

Capacity of balance

10 kg

Precision of balance

0.1 gms

Max working temp of chamber

600 °C

Standard working temp

538 °C with temperature compensating technique

Temperature sensor

K-Type thermocouple

Temperature Control

7″ Touch screen HMI & PLC Controller

Testing Time

30-45 minutes

Ramp & Profile Programming

In built- ramp & profile programming in LCD Touch Screen

Display

LCD Colour display

Results on

In-Built Dot-Matrix Printer

Power Supply

AC 440V ± 10%, 50 Hz

Accessories

Supplied complete with Sample Bucket, Lifting Handle and Asbestos gloves

Overall Dimensions

800 X 800 X 1600 (L X W X D) mm

Weight (Approx.)

290 Kgs Approx.

SS

PRODUCT VIDEO

WORKING PRINCIPALNew

REVIEWNew

Excellent machine! Accurate readings and very sturdy build. The installation team was professional and the after-sales support has been great. Highly recommend for any lab or industrial use.

⭐⭐⭐⭐⭐

KALI

Excellent machine! Accurate readings and very sturdy build … Highly recommend for any lab or industrial use.

⭐⭐⭐⭐

Ratnesh

very good at Response and user friendly machines

⭐⭐⭐⭐⭐

POOJA

With the highly efficient and accurate Servo Universal Testing Machine by Vertex, Now I can test the TMT Bar great accuracy. With the help of this instrument,

⭐⭐⭐⭐⭐

Amjad Ali

The automatic blain air of flowing sample has an amazing accuracy and is simply easy to use. Our team of operators have been using it for more than 7 months now and have submitted zero complaints.

⭐⭐⭐⭐

Faruq Ali

I recently purchased a Servo Compression Automatic Compressive Machine 3000kN from Vertex and I couldn’t be more pleased. The instrument is of high-quality and helps to accurately measure the strain distribution in the preforms. It is easy to use and produces reliable test results.

⭐⭐⭐⭐⭐

Ritesh

×
★★★★★

Daewoo Lanos Full Engine Service Manual

Get Instant Quote

Our Hot Selling Instrument's

Servo Fully Automatic Compression Testing Machine

Servo Fully Automatic Compression Testing Machine

One of the key advantages of the SERVO CONTROLLED FULLY AUTOMATIC COMPRESSION TESTING MACHINE is its ability to deliver highly accurate results. This precision ensures that your materials meet the required standards, reducing the risk of costly errors and rework. Moreover, by producing consistent and reliable outcomes, you build a reputation for quality in your industry.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

Manufactured as per International design, Plate model for highest mechanical stability, accurate centering of load and excellent repeatability. Fully Automatic pace rate control, auto stop and auto release on failure of test specimen, can be attached with flexural load frame or 500 KN load frame.

Semi Automatic Compression Testing Machine

Semi Automatic Compression Testing Machine

Pace rate is achieved manually by controlling the flow control knob and the adjustment can be made by observing the error on the display and the system is released manually after the peak load is achieved.

Rock Core Cutting & Grinding Machine

Rock Core Cutting & Grinding Machine

Rock Cutting Machine can be used to cut cores of varied sizes of concrete, stones, other building materials and metallic specimens.

Our Youtube Channel

Subsribe for New Video's.

Semi Automatic Compression Testing Machine

Concrete PAN Mixer upto 200Ltrs.

Automatic Compression Testing Machine

Automatic Compression Testing Machine

NEW SERVO CONTROLLED COMPRESSION TESTING MACHINE

Daewoo Lanos Full Engine Service Manual

2025 Vertex Group. All rights reserved | Privacy | Copyright | Sitemap | MAKE IN INDIA(MII)